NOTE: STRICTLY ONLY INCLUDED WITH PACKAGE DEAL
As the pioneer of personal watercraft and the creator of the original mass-produced stand-up model, Kawasaki is pleased to present the JET SKI SX-R, a long-awaited model sure to redefine the standard for stand-up power and handling. Powered by a 1,498 cm³ 4-stroke In-Line Four, the SX-R has twice as much power as its 2-stroke predecessor, the JET SKI 800 SX-R, and a broad spread of power that delivers strong acceleration from any rpm. This massive power is harnessed in a newly designed hull that allows riders to use their whole body as they skilfully control this exciting new model. The 4-stroke JET SKI SX-R breathes new life into the standup category. Its combination of big, yet manageable power and agile, rider-active handling offers a wide range of riders an unprecedented riding experience.
The stand-up hull offers the best of both worlds: agile handling and superb stability. This combination ensures the high performance required for racing while offering recreational riders a package they can handle with confidence. Development of the hull incorporated racing feedback. Its agile handling, complemented by great stability and increased power, allows high cornering speed. Corner grip of the well balanced machine exceeds that of the predecessor model - 800 SX-R. Sitting high in the water when stopped, the hull’s facilitates boarding.
DOHC, 16-valve, fuel injected, 4-stroke In-Line Four engine displaces 1,498 cm³ and has a bore/stroke ratio of 83.0 x 69.2 mm. Compression is 10.6:1. Electronic fuel injection system delivers hard-hitting throttle response. Coolant water is force-fed from the jet pump. Filter at the inlet prevents debris from entering the system. Sound absorbing box inside the water muffler contributes to low exhaust noise. Intake manifold designed with feedback from ULTRA 310 Series models contributes to low-rpm acceleration and response.
Water intake is via a special low-resistance stainless steel intake grate. Its design, although slightly longer, was based on the highly efficient grate of the preceeding model - 800 SX-R.
The 148 mm diameter oval-edged, 3-blade, cast stainless-steel impeller delivers strong acceleration, high efficiency and low cavitation. The jet pump drive-line features a large rubber damper to absorb shock loads from the powerful engine, and to reduce drive-line noise. Strong drive shaft complements the engine power; the drive shaft is supported by a sealed bearing.
The Ultra 310R's Kawasaki Splash Deflector (KSD): The ridges across the bottom of the bow deflect water splashing foward from under the hull. A fourth splash deflector mounted at the top reduces spray duirng high speed turns.
The JET SKI SX-R offers double the power of Kawasaki’s last stand-up model - a top speed 25% quicker than the JET SKI 800 SX-R. The SX-R delivers the impressive performance that racers crave: acceleration is overwhelmingly strong, and slalom course times are quick. The broad range of 4-stroke power offered by the SX-R is very manageable, facilitating control.
Injection-moulded sponsons contribute to overall stability as well as sharp, clean turning performance and a very solid feel when banking.
Commensurate with its large hull, the deck features a large, wide floor area (especially at the front), offering greater freedom of movement. Deck has a forward slant, making it easier for riders to brace against the SX-R’s strong acceleration. The high side deck fins are a point of leverage for the legs. Pads on the inside of the deck fins assist with grip.
The handle pole is a reinforced version of that from the 800 SX-R (to ensure the durability to match the increased power and higher top speed). Its pivot was positioned to reduce the amount of forward/backward movement at the grips, to minimise rider fatigue, particularly during long races.
Combined with the efficient 4-stroke engine, the 23 litre fuel tank offers a great range. Indent beneath the handle pole offers convenient storage for small items like rope, flare, etc. Items are secured with a handy rubber net.
MX-style handlebar features a sporty pad that enhances the ride performance. Handlebar made from stainless steel ensures corrosion resistance. Engine and fuel warning lamps built into the handle pole pad provide at-a-glance information.
Key-operated magnetic ignition switch discourages theft. Wrist lanyard connected to the engine stop switch automatically stops the engine should the operator fall overboard.
The SX-R’s sleek and sharp styling followed the design essence from the rich heritage of Kawasaki Jet Skis. Its lines were carefully crafted to give the new machine a distinct Kawasaki look (especially from the front) while contributing to a compact-looking package. The reshaped engine hood not only looks great, it gives easy access to the engine compartment.
Bilge drain plugs in the hull facilitate after-use draining. Integrated flotation cells make the SX-R resistant to sinking.
SKU | 318 |
Brand | Kawasaki NEW |
NOTE: STRICTLY ONLY INCLUDED WITH PACKAGE DEAL
As the pioneer of personal watercraft and the creator of the original mass-produced stand-up model, Kawasaki is pleased to present the JET SKI SX-R, a long-awaited model sure to redefine the standard for stand-up power and handling. Powered by a 1,498 cm³ 4-stroke In-Line Four, the SX-R has twice as much power as its 2-stroke predecessor, the JET SKI 800 SX-R, and a broad spread of power that delivers strong acceleration from any rpm. This massive power is harnessed in a newly designed hull that allows riders to use their whole body as they skilfully control this exciting new model. The 4-stroke JET SKI SX-R breathes new life into the standup category. Its combination of big, yet manageable power and agile, rider-active handling offers a wide range of riders an unprecedented riding experience.
The stand-up hull offers the best of both worlds: agile handling and superb stability. This combination ensures the high performance required for racing while offering recreational riders a package they can handle with confidence. Development of the hull incorporated racing feedback. Its agile handling, complemented by great stability and increased power, allows high cornering speed. Corner grip of the well balanced machine exceeds that of the predecessor model - 800 SX-R. Sitting high in the water when stopped, the hull’s facilitates boarding.
DOHC, 16-valve, fuel injected, 4-stroke In-Line Four engine displaces 1,498 cm³ and has a bore/stroke ratio of 83.0 x 69.2 mm. Compression is 10.6:1. Electronic fuel injection system delivers hard-hitting throttle response. Coolant water is force-fed from the jet pump. Filter at the inlet prevents debris from entering the system. Sound absorbing box inside the water muffler contributes to low exhaust noise. Intake manifold designed with feedback from ULTRA 310 Series models contributes to low-rpm acceleration and response.
Water intake is via a special low-resistance stainless steel intake grate. Its design, although slightly longer, was based on the highly efficient grate of the preceeding model - 800 SX-R.
The 148 mm diameter oval-edged, 3-blade, cast stainless-steel impeller delivers strong acceleration, high efficiency and low cavitation. The jet pump drive-line features a large rubber damper to absorb shock loads from the powerful engine, and to reduce drive-line noise. Strong drive shaft complements the engine power; the drive shaft is supported by a sealed bearing.
The Ultra 310R's Kawasaki Splash Deflector (KSD): The ridges across the bottom of the bow deflect water splashing foward from under the hull. A fourth splash deflector mounted at the top reduces spray duirng high speed turns.
The JET SKI SX-R offers double the power of Kawasaki’s last stand-up model - a top speed 25% quicker than the JET SKI 800 SX-R. The SX-R delivers the impressive performance that racers crave: acceleration is overwhelmingly strong, and slalom course times are quick. The broad range of 4-stroke power offered by the SX-R is very manageable, facilitating control.
Injection-moulded sponsons contribute to overall stability as well as sharp, clean turning performance and a very solid feel when banking.
Commensurate with its large hull, the deck features a large, wide floor area (especially at the front), offering greater freedom of movement. Deck has a forward slant, making it easier for riders to brace against the SX-R’s strong acceleration. The high side deck fins are a point of leverage for the legs. Pads on the inside of the deck fins assist with grip.
The handle pole is a reinforced version of that from the 800 SX-R (to ensure the durability to match the increased power and higher top speed). Its pivot was positioned to reduce the amount of forward/backward movement at the grips, to minimise rider fatigue, particularly during long races.
Combined with the efficient 4-stroke engine, the 23 litre fuel tank offers a great range. Indent beneath the handle pole offers convenient storage for small items like rope, flare, etc. Items are secured with a handy rubber net.
MX-style handlebar features a sporty pad that enhances the ride performance. Handlebar made from stainless steel ensures corrosion resistance. Engine and fuel warning lamps built into the handle pole pad provide at-a-glance information.
Key-operated magnetic ignition switch discourages theft. Wrist lanyard connected to the engine stop switch automatically stops the engine should the operator fall overboard.
The SX-R’s sleek and sharp styling followed the design essence from the rich heritage of Kawasaki Jet Skis. Its lines were carefully crafted to give the new machine a distinct Kawasaki look (especially from the front) while contributing to a compact-looking package. The reshaped engine hood not only looks great, it gives easy access to the engine compartment.
Bilge drain plugs in the hull facilitate after-use draining. Integrated flotation cells make the SX-R resistant to sinking.
SKU | 318 |
Brand | Kawasaki NEW |
Copyright © 2021 Brisbane Kawasaki .
ABN: 21 131 278 174
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Brisbane Kawasaki ’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘Brisbane Kawasaki ’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 58 Delta street, GEEBUNG, QLD, 4034, AU. Our ABN is 21 131 278 174. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
This privacy policy sets out how we uses and protects any information that you give us when you use this website.
We are committed to ensuring that your privacy is protected. Should we ask you to provide certain information by which you can be identified when using this website, then you can be assured that it will only be used in accordance with this privacy statement.
We may change this policy from time to time by updating this page. You should check this page from time to time to ensure that you are happy with any changes.
What we collect
We may collect the following information:
What we do with the information we gather
We require this information to understand your needs and provide you with a better service, and in particular for the following reasons:
Security
We are committed to ensuring that your information is secure. In order to prevent unauthorised access or disclosure, we have put in place suitable physical, electronic and managerial procedures to safeguard and secure the information we collect online.
How we use cookies
A cookie is a small file which asks permission to be placed on your computer's hard drive. Once you agree, the file is added and the cookie helps analyse web traffic or lets you know when you visit a particular site. Cookies allow web applications to respond to you as an individual. The web application can tailor its operations to your needs, likes and dislikes by gathering and remembering information about your preferences.
We use traffic log cookies to identify which pages are being used. This helps us analyse data about webpage traffic and improve our website in order to tailor it to customer needs. We only use this information for statistical analysis purposes and then the data is removed from the system.
Overall, cookies help us provide you with a better website by enabling us to monitor which pages you find useful and which you do not. A cookie in no way gives us access to your computer or any information about you, other than the data you choose to share with us.
You can choose to accept or decline cookies. Most web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. This may prevent you from taking full advantage of the website.
Links to other websites
Our website may contain links to other websites of interest. However, once you have used these links to leave our site, you should note that we do not have any control over that other website. Therefore, we cannot be responsible for the protection and privacy of any information which you provide whilst visiting such sites and such sites are not governed by this privacy statement. You should exercise caution and look at the privacy statement applicable to the website in question.
Controlling your personal information
You may choose to restrict the collection or use of your personal information in the following ways:
We will not sell, distribute or lease your personal information to third parties unless we have your permission or are required by law to do so. We may use your personal information to send you promotional information about third parties which we think you may find interesting if you tell us that you wish this to happen.
If you believe that any information we are holding on you is incorrect or incomplete, please write to or email us as soon as possible at the above address. We will promptly correct any information found to be incorrect.